Home
|
About Us
|
Find Us
|
Contact Us
|
LOGIN
|
Register
|
Hall of Fame
|
Links
|
Terms
|
Privacy
Your Basket
Total Items:
0
Sub Total:
£0.00
Go to checkout
Home
Workshop Services
Wheel Alignment
Alloy Wheel Packages
Wheel Accessories
Tyres
Seats & Harnesses
Styling & Accessories
Lights & Bulbs
Air Filters
Forge Motorsport
Exhausts
Suspension
Brakes
Millers Oils
K&N Oil Filters
Silicone Hose Kits
Gauges
Just-Subaru.com
Hall of Fame
Latest Newsletter
Ebay Outlet Store
Merchandise
You are here:
Home Page
>
Forge Motorsport
>
Forge for Volkswagen
>
Tiguan 2.0 FSiT
Tiguan 2.0 FSiT
Forge Blow Off Adaptor VW Tiguan
R.R.P.
£58.99
Only:
£43.99
Forge has developed a Patented Atmospheric Blow-Off adapter specifically designed to fit this application.
Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with the Bosch engine management systems employed. This is not only a replacement for vehicles fitted with the OEM solenoid valve part number 06F 145 710 D, but will fit earlier applications of the 2.0 FSiT, the later TFSi 2 litre engines.
Blow Off Adaptor for VAG FSiT TFSi Turbo Engines
... £43.99
Forge Replacement Valve VW Tiguan
R.R.P.
£189.99
Only:
£141.99
This valve is for VAG vehicles equipped with the 2.0T FSI or TFSi engines that have the electronically controlled bypass valves. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles fitted with the earlier version of the OEM valve that operate in warmer climates, as a solution to the many failures of the diaphragm that have occurred.
Forge's alternative is a fully engineered solution offering both significantly improved reliability And the valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. It has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.
Replacement Valve for 2.0litre FSiT TFSi Engines
... £141.99
Forge KO4 Uprated Actuator VW Tiguan
R.R.P.
£127.99
Only:
£102.99
This replacement actuator uses a piston design for maximum longevity in comparison to the OEM units and using a range of available springs this actuator can be tuned to suit your requirements.
Available in Alloy or Stainless Steel.
Select Option
Alloy
... £102.99
Stainless Steel
... £122.99
Forge 3mm Alloy Wheel Spacers
R.R.P.
£45.99
Only:
£36.99
These CNC machined precision alloy wheel spacers are 3 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 3mm spacer will give an overall track increase of 6mm when fitted to both sides of an axle.
These spacers are priced and sold in pairs.
3mm Alloy Wheel Spacers
... £36.99
Forge 5mm Alloy Wheel Spacers
R.R.P.
£51.99
Only:
£40.99
These CNC machined precision alloy wheel spacers are 5 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 5mm spacer will give an overall track increase of 10mm when fitted to both sides of an axle.
These spacers are priced and sold in pairs.
5mm Alloy Wheel Spacers
... £40.99
Forge 8mm Alloy Wheel Spacers
R.R.P.
£54.99
Only:
£43.99
These CNC machined precision alloy wheel spacers are 8 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 8mm spacer will give an overall track increase of 16mm when fitted to both sides of an axle.
These spacers are priced and sold in pairs.
8mm Alloy Wheel Spacers
... £43.99
Forge 11mm Alloy Wheel Spacers
R.R.P.
£62.99
Only:
£50.99
These CNC machined precision alloy wheel spacers are 11 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 11mm spacer will give an overall track increase of 22mm when fitted to both sides of an axle.
These spacers are priced and sold in pairs.
Please note: 11mm, 16mm, and 20mm hubcentric wheel spacers will NOT work on the rear wheels of the MK3 VW 5x100 applications due to the longer length of the center hub. There is no problem with the smaller 3mm, 5mm, and 8mm NON-hubcentric spacers.
11mm Alloy Wheel Spacers
... £50.99
Forge 16mm Alloy Wheel Spacers
R.R.P.
£79.99
Only:
£63.99
These CNC machined precision alloy wheel spacers are 16 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 16mm spacer will give an overall track increase of 32mm when fitted to both sides of an axle.
These spacers are priced and sold in pairs.
Please note: 11mm, 16mm, and 20mm hubcentric wheel spacers will NOT work on the rear wheels of the MK3 VW 5x100 applications due to the longer length of the center hub. There is no problem with the smaller 3mm, 5mm, and 8mm NON-hubcentric spacers.
16mm Alloy Wheel Spacers
... £63.99
