Home | About Us | Find Us | Contact Us | LOGIN | Register | Hall of Fame  | Links  | Terms  | Privacy  
Your Basket
0
£0.00
Go to checkout
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
spacer
Project Cars
TTRS Mk2 09-
Forge Replacement Piston Valve for Audi TTRS Mk2
Forge Replacement Piston Valve for Audi TTRS Mk2
Part Code: FMDVAURS
R.R.P. £189.99
Only: £151.99

As an alternative recirculation valve on the Audi TT RS 5 cylinder engine, this kit is a fully engineered solution offering both significantly improved reliability as well as valve related boost response. The valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible. This kit is supplied with an additional uprated spring that may be required if the vehicle has had a significant boost increase after an ECU performance upgrade.

 Buy product

Forge Intercooler for the Audi TT RS 5 cylinder
Forge Intercooler for the Audi TT RS 5 cylinder
Part Code: FMTTRSINT
R.R.P. £713.99
Only: £642.99

A larger and more efficient intercooler for the Audi TT RS. This kit is supplied with comprehensive instructions and ready to install. After installation we monitored gains up to 22hp on a standard car. Though more importantly the significant horsepower and torque gains were seen across the entire rev range making this a highly recommended upgrade.

 Buy product

Alloy Coolant Tank for Audi TT Mk2
Alloy Coolant Tank for Audi TT Mk2
R.R.P. £305.99
Only: £274.99

A spherical alloy header tank to replace the OEM plastic tank.

As fitted to our Project TT demo car

Please note for those vehicles where a coolant level sensor is incorporated within the tank, we will supply the alloy tank complete with sensor and short leads that will require connecting to the OEM wiring harness with the supplied connectors.so

 Buy product

Forge 3mm Alloy Wheel Spacers Audi TTRS Mk2
Forge 3mm Alloy Wheel Spacers Audi TTRS Mk2
Part Code: FMWS3
R.R.P. £45.99
Only: £36.99

These CNC machined precision alloy wheel spacers are 3 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 3mm spacer will give an overall track increase of 6mm when fitted to both sides of an axle.

These spacers are priced and sold in pairs.

 Buy product

Forge 5mm Alloy Wheel Spacers Audi TTRS Mk2
Forge 5mm Alloy Wheel Spacers Audi TTRS Mk2
Part Code: FMWS5
R.R.P. £51.99
Only: £40.99

These CNC machined precision alloy wheel spacers are 5 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 5mm spacer will give an overall track increase of 10mm when fitted to both sides of an axle.

These spacers are priced and sold in pairs.

 Buy product

Forge 8mm Alloy Wheel Spacers Audi TTRS Mk2
Forge 8mm Alloy Wheel Spacers Audi TTRS Mk2
Part Code: FMWS8
R.R.P. £54.99
Only: £43.99

These CNC machined precision alloy wheel spacers are 8 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 8mm spacer will give an overall track increase of 16mm when fitted to both sides of an axle.

These spacers are priced and sold in pairs.

 Buy product

Forge 11mm Alloy Wheel Spacers Audi TTRS Mk2
Forge 11mm Alloy Wheel Spacers Audi TTRS Mk2
Part Code: FMWS10
R.R.P. £62.99
Only: £50.99

These CNC machined precision alloy wheel spacers are 11 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 11mm spacer will give an overall track increase of 22mm when fitted to both sides of an axle.

These spacers are priced and sold in pairs.

Please note: 11mm, 16mm, and 20mm hubcentric wheel spacers will NOT work on the rear wheels of the MK3 VW 5x100 applications due to the longer length of the center hub. There is no problem with the smaller 3mm, 5mm, and 8mm NON-hubcentric spacers.

 Buy product

Forge 16mm Alloy Wheel Spacers Audi TTRS Mk2
Forge 16mm Alloy Wheel Spacers Audi TTRS Mk2
Part Code: FMWS16
R.R.P. £79.99
Only: £63.99

These CNC machined precision alloy wheel spacers are 16 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcetric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 16mm spacer will give an overall track increase of 32mm when fitted to both sides of an axle.

These spacers are priced and sold in pairs.

Please note: 11mm, 16mm, and 20mm hubcentric wheel spacers will NOT work on the rear wheels of the MK3 VW 5x100 applications due to the longer length of the center hub. There is no problem with the smaller 3mm, 5mm, and 8mm NON-hubcentric spacers.

 Buy product

Check Out Our Ebay Store For Our Blowout Deals
Follow Revolution on Facebook